Humboldt Bay Social Club

Food Facility - Full Prep
900 New Navy Base Rd, Fairhaven

Routine Inspection

ROACHY SAYS:

“Huzzah! This establishment has successfully impressed the government! Kudos, Humboldt Bay Social Club!!”

Reinspection

ROACHY SAYS:

“Humboldt foodies rejoice! Our reports show that Humboldt Bay Social Club knows how to get you fed in a sanitary manner. Now that's nummy!!”

Routine Inspection
02. Food safety certification, food handler card compliance

Conditions Observed: Food handler cards were not available for review during inspection. Provide employee food handler cards at the facility by 8/25/20 to avoid a reinspection.

ROACHY SAYS:

“Food facilities that prepare, handle, or serve non-prepackaged potentially hazardous food, shall have an owner or employee who has passed an aproved food safety certification examination. Food handlers that prepare, handle, or serve non-prepackaged potentially hazardous food, shall obtain a valid Food Handler Card within 30 days after date of hire. (113947.1-113947.5, 113948)”

19. Compliance with variance, specialized process, reduced O2 packaging, HACCP plan.

Conditions Observed: Observed vacuum sealed meats and cheeses on premises and facility is lacking Hazard Analysis Critical Control Point (HACCP) plan approved by California Department of Public Health (CDPH). Immediately stop vacuum sealing foods until an approved HACCP plan is obtained. Submit proof that vacuum sealed foods have been removed from the premises by end of the day 7/29/20 to avoid a reinspection.

ROACHY SAYS:

“A food facility may engage in the following activities only pursuant to a written and approved HACCP plan: smoking food as a method of preservation, curing food, using food additives or adding components such as vinegar as a method of food preservation or to render a food so that it is not potentially hazardous, operating a molluscan shelfish life support system display tank, custom processing of animals for personal use as food and not for sale or service in a food facility, using acidification or water activity to prevent the growth of Clostridium botulinum, packaging potentially hazardous food using a reduced oxygen packaging method except as specified in 114419.2(a - c), or preparing food by another method that is determined by the Enforcement Agency to require a HACCP plan. Food facilities with CDPH approved variances must maintain a copy at the food facility at all times. A variance may be suspended or revoked if the food facility is found to be non-complaint with the terms of the variance. (114057, 114057.1, 114417,114117.2, 114417.5, 114417.6, 114417.7, 114419 -114419.3)”

49. Plan Review.

Conditions Observed: Facility built a second kitchen and did not submit plans to this office for review and approval. Any modifications or additions to your previously approved food facility require approval from this office prior to construction to ensure it meets current California Retail Food Code requirements.

ROACHY SAYS:

“A person proposing to build or remodel a food facility shall submit complete, easily readable plans drawn to scale and specifications to the enforcement agency for review. Applicant shall receive plan approval before starting any new construction or remodeling of any facility for use as a retail food facility. Plans and specifications may also be required by the enforcement agency if the agency determines that they are necessary to assure compliance with the requirements of this part, including, but not limited to, a menu change or change in the facility's method of operation. (114380 (a, b))”

Reinspection

ROACHY SAYS:

“Zero violations! Now that's how you keep 'em coming back for more! I'll be sending all my human friends to Humboldt Bay Social Club! Yum yum!!”

Routine Inspection
08. Proper hot and cold holding temperatures.

Conditions Observed: Measured organic half & half 48F and non-organic half & half 48.5F with probe thermometer in keg refrigerator. Ambient temperature in this unit measured 46.8F. Adjust/service/repair keg refrigerator to hold cold potentially hazardous foods at or below 41F at all times.

ROACHY SAYS:

“Except during preparation, cooking, cooling, transportation to or from a retail food facility for a period of less than thirty minutes, when time is used as the public health control, or as otherwise specified, potentially hazardous foods shall be maintained at or below 41F or at or above 135F. The following foods may be held at or below 45F: raw shell eggs, unshucked live molluscan shellfish, pasteurized milk and pasteurized milk products in original sealed containers, potentially hazardous foods held during transportation. Potentially hazardous foods held for dispensing in serving lines and salad bars may be held at 45F, not to exceed 12 hours in a 24 hour period, if unused portions are discarded. Food preparation shall not exceed two cumulative hours without a return to the required holding temperatures. (113996, 113998, 114037, 114343(a))”

15. Food contact surfaces: clean and sanitized.

Conditions Observed: Observed mold-like substance in ice machine. Clean and sanitize ice machine per manufacturer’s instructions to prevent mold growth. This is a major violation that will require a reinspection on or after 2/3/20.

ROACHY SAYS:

“Food-contact surfaces and utensils shall be clean to sight and touch. Food-contact surfaces and multiservice utensils shall be effectively washed, rinsed, and sanitized to remove or completely loosen soils by use of manual or mechanical methods. Precleaning may be required. Manual sanitization shall be accomplished during the final rinse by contact with solution containing 100 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. Mechanical sanitization shall be accomplished in the final rinse by achieving a utensil surface temperature of 160F or by contact with solution containing 50 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. After cleaning and sanitizing, equipment and utensils shall be air dried. Mechancial warewash machines must be approved and installed and operated according to manufacturer's specifications. Food contact surfaces, utensils, and equipment shall be cleaned and sanitized at the following times: before each use with different type of raw food of animal origin, when changing from raw food to ready to eat food, between uses with raw produce and potentially hazardous food, before using a thermometer, and any time during the operation when contamination may have occurred. Warewash sinks used to wash wiping cloths, wash produce, or thaw food must be cleaned and sanitized before and after these uses. Equipment, food contact surfaces, and utensils must be cleaned and sanitized throughout the day at least every four hours or as needed to prevent contamination. (114097, 114099.1, 114099.2, 114099.4, 114099.6, 114099.7, 114101, 114105, 114109, 114111, 114113, 114115(a,c), 114117, 114125(b), 114141)”

17. Compliance with shell stock tags, condition, display.

Conditions Observed: Oyster shell stock tags were observed attached to container they were received in, however facility could not provide proof of shell stock tags kept on file for 90 calendar days from the date the lot is emptied. The identity of the source of shell stock that are sold or served shall be maintained for 90 calendar days from the dates of harvest by using an approved record keeping system that keeps the tags in chronological order correlated to the date or dates the shell stock are sold or served.

ROACHY SAYS:

“Shellstock shall be obtained in containers that bear legible source identification tags. A food facility shall ensure that shellstock from one tagged or labeled container are not commingled with shellstock from another container with different certification numbers. Shellstock tags shall remain attached to the container that they are received in until the container is empty. The identity of the source of the shellstock sold or served shall be maintained for 90 days from the dates of harvest by using an approved recordkeeping system that keeps the tags or labels in chronological order correlated to the date or dates the shellstock is sold or served. The source of the shellstock on display shall be identified. Shellstock that are portioned or prepackaged shall have a copy of the corresponding shellstock tag. Except in accordance with an approved HACCP plan, molluscan shellfish life-support system display tanks shall not be used to display shellfish that are offered for human consumption. (114039-114039.5)”

19. Compliance with variance, specialized process, reduced O2 packaging, HACCP plan.

Conditions Observed: The facility is sealing/canning pickled foods without an approved Hazard Analysis Critical Control Point (HACCP) plan. Immediately stop sealing/canning pickled foods until a HACCP plan is submitted to, and approved by The Calfornia Department of Public Health. Or, you may continue to pickle foods, as long this process is conducted at your permitted retail facility, but you may not seal them, as this requires an approved HACCP to prevent the potential growth of Clostridium botulinum (Botulism). This is a major violation that will require a reinspection on or after 2/3/20.

ROACHY SAYS:

“A food facility may engage in the following activities only pursuant to a written and approved HACCP plan: smoking food as a method of preservation, curing food, using food additives or adding components such as vinegar as a method of food preservation or to render a food so that it is not potentially hazardous, operating a molluscan shelfish life support system display tank, custom processing of animals for personal use as food and not for sale or service in a food facility, using acidification or water activity to prevent the growth of Clostridium botulinum, packaging potentially hazardous food using a reduced oxygen packaging method except as specified in 114419.2(a - c), or preparing food by another method that is determined by the Enforcement Agency to require a HACCP plan. Food facilities with CDPH approved variances must maintain a copy at the food facility at all times. A variance may be suspended or revoked if the food facility is found to be non-complaint with the terms of the variance. (114057, 114057.1, 114417,114117.2, 114417.5, 114417.6, 114417.7, 114419 -114419.3)”

48. Signs Posted, Last Inspection Report Available.

Conditions Observed: Observed expired permit hung in facility. Please hang current food permit in a conspicuous location.

ROACHY SAYS:

“Handwashing signs directing employees to wash hands shall be posted in each toilet room used by food employees. No smoking signs shall be posted in food preparation, food storage, warewashing, and utensil storage areas. A copy of the most recent routine inspection report shall be maintained at the food facility and made available upon request. The food facility shall post a notice advising consumers that a copy of the most recent routine inspection report is available for review by any interested party. A permit shall be posted in a conspicuous place. (113725.1, 113953.5, 113978, 114381(e))”

Routine Inspection
36. Equipment / Utensils approved; installed, clean, good repair, capacity.

Conditions Observed: Observed mold-like substance in ice machine. Clean and sanitize ice machine per manufacturer’s instructions and keep on regular cleaning and maintenance schedule to prevent mold growth.

ROACHY SAYS:

“Utensils and equipment shall be kept fully operative and in good repair. All new and replacement equipment shall be properly installed and be certified or classified for sanitation by an ANSI accredited certification program. Electrical appliances must meet UL standards. Single-use articles shall not allow migration of deleterious substances or impart colors, odors, or tastes to food. Multi-use food contact surfaces must be smooth, free of breaks, chips, and similar imperfections; free of sharp internal angles, corners, and crevices; finished to have smooth welds and joints; be accessible for cleaning and inspection. Unless specified, wood and wood wicker may not be used as a food-contact surface. Unless specified, copper and copper alloys such as brass may not be used in contact with a food that has a pH below six or for a fitting between a backflow preventer and a carbonator. Beverage tubing and cold-plate beverage cooling devices cannot be installed in contact with stored ice intended to be used as food. Equipment that is not movable must be installed to allow for cleaning in place. Cutting or piercing parts of can openers must be readily removable. Facilities that wash, rinse, soak, thaw, or similarly prepare foods shall be provided with a approved food preparation sink. Reservoirs that supply water to produce foggers must be cleaned and maintained. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced or replaced if they can no longer be effectively cleaned and sanitized. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182)”

39. Thermometers provided and accurate.

Conditions Observed: Upright refrigerator is lacking an internal thermometer. Provide a readily visible thermometer in the warmest part of the refrigeration unit to monitor holding temperatures.

ROACHY SAYS:

“An accurate easily readable metal probe thermometer suitable for measuring temperature of food shall be available to the food handler. Thermometers shall be calibrated in accordance with manufacturer's specifications as necessary to ensure their accuracy. A thermometer +/- 2 degrees F shall be provided for all refrigerators, hot and cold holding units, and high temperature warewashing machines. (114157, 114159)”

44. Premises; personal/cleaning items; vermin-proofing.

Conditions Observed: Observed front door propped open during the inspection. The facility is to remain vermin proof at all times. Keep doors and windows closed at all times, or install screens, to prevent passage or harborage of animals, birds or vermin, including but not limited to, insects and rodents.

ROACHY SAYS:

“All premises of a food facility shall be kept clean, fully operative, and in good repair. The premise of a food facility shall be free of litter and items unnecessary to the operation of the facility. Areas designated for employees to eat and drink shall be located so that food, clean equipent and utensils, linens, and single-use articles are protected from contamination. Personal items shall be stored in a designated area to prevent contamination of food or utensils. Food prep sinks, warewashing sinks, and handwashing sinks shall not be used for the cleaning or maintenance of tools or cleaning supplies or to dispose of mop water and similar liquid wastes. A dedicated janitorial sink with a drain shall be provided and conveniently located. A separate room, area, or cabinet shall be provided for cleaning supplies. The facility shall be kept vermin proof. Insect electrocution devices shall retain the insect within the device and shall not be located over food or utensil handling areas. (114123, 114143(a, b), 114256, 114256.1, 114256.2, 114256.4, 114257, 114257.1, 114259, 114259.2, 114259.3, 114279, 114281, 114282)”

Routine Inspection
34. Non-food-contact surfaces clean.

Conditions Observed: Observed debris in floor sink under food prep sink. Clean non-food contact surfaces of equipment regularly to prevent buildup.

ROACHY SAYS:

“Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. (114115(b))”

39. Thermometers provided and accurate.

Conditions Observed: Observed new upright refrigerator lacking a thermometer. Install a readily visible thermometer in the warmest part of this refrigerator to verify it is holding at or below 38F (The smoked salmon requires being held at or below 38F).

ROACHY SAYS:

“An accurate easily readable metal probe thermometer suitable for measuring temperature of food shall be available to the food handler. Thermometers shall be calibrated in accordance with manufacturer's specifications as necessary to ensure their accuracy. A thermometer +/- 2 degrees F shall be provided for all refrigerators, hot and cold holding units, and high temperature warewashing machines. (114157, 114159)”

© 2021 Lost Coast Communications Contact: news@lostcoastoutpost.com.