Moose Lodge #636 - Eureka

4328 Campton Rd, Eureka

Routine Inspection

ROACHY SAYS:

“Ooo! Welcome to Sanitarytown! Population: Moose Lodge #636 - Eureka! I see lots of happy hungry mouths in this establishment's near future!!”

Routine Inspection

ROACHY SAYS:

“Humboldt foodies rejoice! Our reports show that Moose Lodge #636 - Eureka knows how to get you fed in a sanitary manner. Now that's nummy!!”

Routine Inspection

ROACHY SAYS:

“Zero violations! Now that's how you keep 'em coming back for more! I'll be sending all my human friends to Moose Lodge #636 - Eureka! Yum yum!!”

Routine Inspection
02. Food safety certification, food handler card compliance

Conditions Observed: Food Safety Manager (FSM) certificate has expired. Obtain FSM certificate within 60 days and submit a copy to this office for verification by 2/10/20 to avoid a reinspection.

ROACHY SAYS:

“Food facilities that prepare, handle, or serve non-prepackaged potentially hazardous food, shall have an owner or employee who has passed an aproved food safety certification examination. Food handlers that prepare, handle, or serve non-prepackaged potentially hazardous food, shall obtain a valid Food Handler Card within 30 days after date of hire. (113947.1-113947.5, 113948)”

36. Equipment / Utensils approved; installed, clean, good repair, capacity.

Conditions Observed: Observed buildup in soda guns at the bar. Soak soda guns over night to prevent buildup.

ROACHY SAYS:

“Utensils and equipment shall be kept fully operative and in good repair. All new and replacement equipment shall be properly installed and be certified or classified for sanitation by an ANSI accredited certification program. Electrical appliances must meet UL standards. Single-use articles shall not allow migration of deleterious substances or impart colors, odors, or tastes to food. Multi-use food contact surfaces must be smooth, free of breaks, chips, and similar imperfections; free of sharp internal angles, corners, and crevices; finished to have smooth welds and joints; be accessible for cleaning and inspection. Unless specified, wood and wood wicker may not be used as a food-contact surface. Unless specified, copper and copper alloys such as brass may not be used in contact with a food that has a pH below six or for a fitting between a backflow preventer and a carbonator. Beverage tubing and cold-plate beverage cooling devices cannot be installed in contact with stored ice intended to be used as food. Equipment that is not movable must be installed to allow for cleaning in place. Cutting or piercing parts of can openers must be readily removable. Facilities that wash, rinse, soak, thaw, or similarly prepare foods shall be provided with a approved food preparation sink. Reservoirs that supply water to produce foggers must be cleaned and maintained. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced or replaced if they can no longer be effectively cleaned and sanitized. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182)”

48. Signs Posted, Last Inspection Report Available.

Conditions Observed: Observed expired permit hung in kitchen. Please hang current permit to operate in a conspicuous location.

ROACHY SAYS:

“Handwashing signs directing employees to wash hands shall be posted in each toilet room used by food employees. No smoking signs shall be posted in food preparation, food storage, warewashing, and utensil storage areas. A copy of the most recent routine inspection report shall be maintained at the food facility and made available upon request. The food facility shall post a notice advising consumers that a copy of the most recent routine inspection report is available for review by any interested party. A permit shall be posted in a conspicuous place. (113725.1, 113953.5, 113978, 114381(e))”

Routine Inspection
28. Food separated and protected.

Conditions Observed: Observed ice used in drinks in direct contact with soda lines. The soda lines are not an easily cleanable surface and shall be separated from ice used in drinks to prevent contamination.

ROACHY SAYS:

“Food shall be protected from contamination during transportation, storage, preparation, holding, and display. Adequate and suitable counter space shall be provided for all food preparation. Food preparation shall be conducted wthin an approved food compartment or fully enclosed food facility. Open-air barbecues shall be separated from public access. (113984(a-f), 113986, 114060, 114067(a,d,e,j), 114069(a, c, d), 114077, 114089.1(c), 114143(c,e))”

36. Equipment / Utensils approved; installed, clean, good repair, capacity.

Conditions Observed: Observed buildup in soda guns at bar. Soak soda guns over night to prevent buildup.

ROACHY SAYS:

“Utensils and equipment shall be kept fully operative and in good repair. All new and replacement equipment shall be properly installed and be certified or classified for sanitation by an ANSI accredited certification program. Electrical appliances must meet UL standards. Single-use articles shall not allow migration of deleterious substances or impart colors, odors, or tastes to food. Multi-use food contact surfaces must be smooth, free of breaks, chips, and similar imperfections; free of sharp internal angles, corners, and crevices; finished to have smooth welds and joints; be accessible for cleaning and inspection. Unless specified, wood and wood wicker may not be used as a food-contact surface. Unless specified, copper and copper alloys such as brass may not be used in contact with a food that has a pH below six or for a fitting between a backflow preventer and a carbonator. Beverage tubing and cold-plate beverage cooling devices cannot be installed in contact with stored ice intended to be used as food. Equipment that is not movable must be installed to allow for cleaning in place. Cutting or piercing parts of can openers must be readily removable. Facilities that wash, rinse, soak, thaw, or similarly prepare foods shall be provided with a approved food preparation sink. Reservoirs that supply water to produce foggers must be cleaned and maintained. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced or replaced if they can no longer be effectively cleaned and sanitized. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182)”

Reinspection

ROACHY SAYS:

“Zero violations! Now that's how you keep 'em coming back for more! I'll be sending all my human friends to Moose Lodge #636 - Eureka! Yum yum!!”

Routine Inspection
22. Hot and Cold Water Available

Conditions Observed: Measured hot water at 2 compartment sink in the kitchen 107.5F. The hot water in the dishwasher measured 160F and hot water at 3 compartment sink in the bar measured 120F. Hot water shall be delivered at or above 120F at all mixing faucets. Adjust/repair/replace water heater. This is a major violation that will require a reinspection, please call to schedule prior to 2/26/19.

ROACHY SAYS:

“An adequate, protected, pressurized, approved potable supply of hot and cold water shall be provided at all times. Hot water shall be supplied at a minimum temperature of 120F when measured from the faucet. The temperature of water provided to handwashing facilities shall be at least 100F. Handwashing facilities equipped with non-adjustable faucets shall have their temperature set between 100F and 108F. Hot water shall be provided at the food preparation sink and janitorial sink. (113953(c), 114099.2(b), 114163(a)(3), 114189, 114192, 114192.1, 114195)”

© 2024 Lost Coast Communications Contact: news@lostcoastoutpost.com.