Tomo Japanese Restaurant

708 9th St, Arcata

Routine Inspection
15. Food contact surfaces: clean and sanitized.

Conditions Observed: Observed ice scoops resting in visibly soiled container. Observed food debris on noodle bowl on shelf above 2-door prep in the kitchen. Observed minor amount of pink slime-like build-up on divider in ice machine. Ice scoops, container, and noodle bowl were sent to the 3-part sink. Discussed how to clean the ice machine. Clean and sanitize soiled surfaces to clean to the sight and clean to the touch.

ROACHY SAYS:

“Food-contact surfaces and utensils shall be clean to sight and touch. Food-contact surfaces and multiservice utensils shall be effectively washed, rinsed, and sanitized to remove or completely loosen soils by use of manual or mechanical methods. Precleaning may be required. Manual sanitization shall be accomplished during the final rinse by contact with solution containing 100 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. Mechanical sanitization shall be accomplished in the final rinse by achieving a utensil surface temperature of 160F or by contact with solution containing 50 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. After cleaning and sanitizing, equipment and utensils shall be air dried. Mechancial warewash machines must be approved and installed and operated according to manufacturer's specifications. Food contact surfaces, utensils, and equipment shall be cleaned and sanitized at the following times: before each use with different type of raw food of animal origin, when changing from raw food to ready to eat food, between uses with raw produce and potentially hazardous food, before using a thermometer, and any time during the operation when contamination may have occurred. Warewash sinks used to wash wiping cloths, wash produce, or thaw food must be cleaned and sanitized before and after these uses. Equipment, food contact surfaces, and utensils must be cleaned and sanitized throughout the day at least every four hours or as needed to prevent contamination. (114097, 114099.1, 114099.2, 114099.4, 114099.6, 114099.7, 114101, 114105, 114109, 114111, 114113, 114115(a,c), 114117, 114125(b), 114141)”

17. Compliance with shell stock tags, condition, display.

Conditions Observed: Stocktags were not in chronological order today (per employee the envelope recently fell). Some shellstock tags lack dates specifying when that shellstock was served. Store shellstock tags in a method that conforms to CalCode requirements.

ROACHY SAYS:

“Shellstock shall be obtained in containers that bear legible source identification tags. A food facility shall ensure that shellstock from one tagged or labeled container are not commingled with shellstock from another container with different certification numbers. Shellstock tags shall remain attached to the container that they are received in until the container is empty. The identity of the source of the shellstock sold or served shall be maintained for 90 days from the dates of harvest by using an approved recordkeeping system that keeps the tags or labels in chronological order correlated to the date or dates the shellstock is sold or served. The source of the shellstock on display shall be identified. Shellstock that are portioned or prepackaged shall have a copy of the corresponding shellstock tag. Except in accordance with an approved HACCP plan, molluscan shellfish life-support system display tanks shall not be used to display shellfish that are offered for human consumption. (114039-114039.5)”

19. Compliance with variance, specialized process, reduced O2 packaging, HACCP plan.

Conditions Observed: Observed sushi rice pH and methodology for measuring sushi rice pH vary from the facility’s sushi rice HACCP. As discussed during the inspection, follow your HACCP and use the appropriate ratio of rice to distilled water (measure the rice and water). Test strips in use must be accurate and in good condition. Discard today’s rice 4 hours after it was pulled from the steamer. This violation requires a reinspection on/after 8/2/21.

ROACHY SAYS:

“A food facility may engage in the following activities only pursuant to a written and approved HACCP plan: smoking food as a method of preservation, curing food, using food additives or adding components such as vinegar as a method of food preservation or to render a food so that it is not potentially hazardous, operating a molluscan shelfish life support system display tank, custom processing of animals for personal use as food and not for sale or service in a food facility, using acidification or water activity to prevent the growth of Clostridium botulinum, packaging potentially hazardous food using a reduced oxygen packaging method except as specified in 114419.2(a - c), or preparing food by another method that is determined by the Enforcement Agency to require a HACCP plan. Food facilities with CDPH approved variances must maintain a copy at the food facility at all times. A variance may be suspended or revoked if the food facility is found to be non-complaint with the terms of the variance. (114057, 114057.1, 114417,114117.2, 114417.5, 114417.6, 114417.7, 114419 -114419.3)”

36. Equipment / Utensils approved; installed, clean, good repair, capacity.

Conditions Observed: Observed water pooling in the left side of the 2-door Silver King fridge. Identify source of moisture and correct.

ROACHY SAYS:

“Utensils and equipment shall be kept fully operative and in good repair. All new and replacement equipment shall be properly installed and be certified or classified for sanitation by an ANSI accredited certification program. Electrical appliances must meet UL standards. Single-use articles shall not allow migration of deleterious substances or impart colors, odors, or tastes to food. Multi-use food contact surfaces must be smooth, free of breaks, chips, and similar imperfections; free of sharp internal angles, corners, and crevices; finished to have smooth welds and joints; be accessible for cleaning and inspection. Unless specified, wood and wood wicker may not be used as a food-contact surface. Unless specified, copper and copper alloys such as brass may not be used in contact with a food that has a pH below six or for a fitting between a backflow preventer and a carbonator. Beverage tubing and cold-plate beverage cooling devices cannot be installed in contact with stored ice intended to be used as food. Equipment that is not movable must be installed to allow for cleaning in place. Cutting or piercing parts of can openers must be readily removable. Facilities that wash, rinse, soak, thaw, or similarly prepare foods shall be provided with a approved food preparation sink. Reservoirs that supply water to produce foggers must be cleaned and maintained. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced or replaced if they can no longer be effectively cleaned and sanitized. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182)”

45. Floor, walls, and ceilings: built, maintained, clean.

Conditions Observed: Observed an approximately 8 by 6 inch hole in the wall opposite the walk-in door. Repair hole to eliminate potential egress.

ROACHY SAYS:

“Food facilities shall be fully enclosed in a building consisting of permanent floors, walls, and an overhead structure that meets minimum standards. The walls and ceiling shall be smooth, durable, nonabsorbent, and easily cleanable. Flooring and base coving shall be smooth, durable, and made of approved nonabsorbent material that is easily cleanable. Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius and shall extend up the wall at least 4 inches. (114143(d), 114266, 114268, 114268.1, 114271, 114272)”

Routine Inspection
08. Proper hot and cold holding temperatures.

Conditions Observed: Measured foods in the walkin to be above 41 F (shell egg, 45 F; lime, 46 F). Observed thermometer in the walkin at 50 F. Adjust/service/repair to cold-hold foods at 41 F or below. Owner requested service during the inspection.

ROACHY SAYS:

“Except during preparation, cooking, cooling, transportation to or from a retail food facility for a period of less than thirty minutes, when time is used as the public health control, or as otherwise specified, potentially hazardous foods shall be maintained at or below 41F or at or above 135F. The following foods may be held at or below 45F: raw shell eggs, unshucked live molluscan shellfish, pasteurized milk and pasteurized milk products in original sealed containers, potentially hazardous foods held during transportation. Potentially hazardous foods held for dispensing in serving lines and salad bars may be held at 45F, not to exceed 12 hours in a 24 hour period, if unused portions are discarded. Food preparation shall not exceed two cumulative hours without a return to the required holding temperatures. (113996, 113998, 114037, 114343(a))”

15. Food contact surfaces: clean and sanitized.

Conditions Observed: Observed residual moisture in stacked pint glasses; showed observations to the Owner. Avoid wet nesting. Allow glasses to air dry completely before stacking.

ROACHY SAYS:

“Food-contact surfaces and utensils shall be clean to sight and touch. Food-contact surfaces and multiservice utensils shall be effectively washed, rinsed, and sanitized to remove or completely loosen soils by use of manual or mechanical methods. Precleaning may be required. Manual sanitization shall be accomplished during the final rinse by contact with solution containing 100 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. Mechanical sanitization shall be accomplished in the final rinse by achieving a utensil surface temperature of 160F or by contact with solution containing 50 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. After cleaning and sanitizing, equipment and utensils shall be air dried. Mechancial warewash machines must be approved and installed and operated according to manufacturer's specifications. Food contact surfaces, utensils, and equipment shall be cleaned and sanitized at the following times: before each use with different type of raw food of animal origin, when changing from raw food to ready to eat food, between uses with raw produce and potentially hazardous food, before using a thermometer, and any time during the operation when contamination may have occurred. Warewash sinks used to wash wiping cloths, wash produce, or thaw food must be cleaned and sanitized before and after these uses. Equipment, food contact surfaces, and utensils must be cleaned and sanitized throughout the day at least every four hours or as needed to prevent contamination. (114097, 114099.1, 114099.2, 114099.4, 114099.6, 114099.7, 114101, 114105, 114109, 114111, 114113, 114115(a,c), 114117, 114125(b), 114141)”

Routine Inspection
17. Compliance with shell stock tags, condition, display.

Conditions Observed: Observed stock tags retained at the facility lack dates correlated to when shell stock was sold/served. As discussed today and in previous inspection, label each stock tag with an in and out date. See regulation description. Provide proof of correction to your inspector by 11/30/2020.

ROACHY SAYS:

“Shellstock shall be obtained in containers that bear legible source identification tags. A food facility shall ensure that shellstock from one tagged or labeled container are not commingled with shellstock from another container with different certification numbers. Shellstock tags shall remain attached to the container that they are received in until the container is empty. The identity of the source of the shellstock sold or served shall be maintained for 90 days from the dates of harvest by using an approved recordkeeping system that keeps the tags or labels in chronological order correlated to the date or dates the shellstock is sold or served. The source of the shellstock on display shall be identified. Shellstock that are portioned or prepackaged shall have a copy of the corresponding shellstock tag. Except in accordance with an approved HACCP plan, molluscan shellfish life-support system display tanks shall not be used to display shellfish that are offered for human consumption. (114039-114039.5)”

41. Plumbing: proper backflow devices.

Conditions Observed: Observed handwashing sink at sushi island to leaking. Observed use of a bucket to control a leak in the walkin. Repair leaks to eliminate free mositure.

ROACHY SAYS:

“Steam tables, ice machines, ice bins, food preparation sinks, display cases, walk-in refrigeration units, and other similar equipment that discharge liquid waste shall drain into a floor sink with an air gap or other approved type of receptor. All plumbing and plumbing fixtures shall be installed in compliance with applicable local plumbing ordinances, maintained so as to prevent any contamination, kept clean, fully operative, and in good repair. The potable water supply shall be protected with a backflow or back siphonage protection device. Any hose used for potable water shall be of approved materials, labeled, properly stored, and used for no other purpose. Liquid drain lines shall not pass through an ice machine or an ice storage bin. (114171, 114190, 114192, 114193, 114193.1, 114199, 114201, 114269)”

Routine Inspection
15. Food contact surfaces: clean and sanitized.

Conditions Observed: Measured chlorine in dishwasher to be 0 PPM. Employee primed sanitizing line, measured chlorine to be less than 50 PPM. Employee continued to trouble-shoot (again priming the line and ran dishwasher twice); measured 50 PPM. Owner requested service during the inspection. Thank you. Adjust/service/repair dishwasher to ensure a chlorine concentration of 50 PPM in all washes. Provide proof of correction by 5 PM on June 15, 2020. Observed very minor build-up of pink residue on left corner of divider in ice machine. Remove build-up; clean and sanitize routinely to prevent slime-like build-up.

ROACHY SAYS:

“Food-contact surfaces and utensils shall be clean to sight and touch. Food-contact surfaces and multiservice utensils shall be effectively washed, rinsed, and sanitized to remove or completely loosen soils by use of manual or mechanical methods. Precleaning may be required. Manual sanitization shall be accomplished during the final rinse by contact with solution containing 100 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. Mechanical sanitization shall be accomplished in the final rinse by achieving a utensil surface temperature of 160F or by contact with solution containing 50 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. After cleaning and sanitizing, equipment and utensils shall be air dried. Mechancial warewash machines must be approved and installed and operated according to manufacturer's specifications. Food contact surfaces, utensils, and equipment shall be cleaned and sanitized at the following times: before each use with different type of raw food of animal origin, when changing from raw food to ready to eat food, between uses with raw produce and potentially hazardous food, before using a thermometer, and any time during the operation when contamination may have occurred. Warewash sinks used to wash wiping cloths, wash produce, or thaw food must be cleaned and sanitized before and after these uses. Equipment, food contact surfaces, and utensils must be cleaned and sanitized throughout the day at least every four hours or as needed to prevent contamination. (114097, 114099.1, 114099.2, 114099.4, 114099.6, 114099.7, 114101, 114105, 114109, 114111, 114113, 114115(a,c), 114117, 114125(b), 114141)”

Reinspection

ROACHY SAYS:

“Huzzah! This establishment has successfully impressed the government! Kudos, Tomo Japanese Restaurant!!”

Reinspection
19. Compliance with variance, specialized process, reduced O2 packaging, HACCP plan.

Conditions Observed: At the facility today for a reinspection of compliance with sushi rice HACCP. FSM has retrained the three staff in the facility’s HACCP; please date (using the month-day-year format) each signature. Per FSM, vinegar is added when rice reaches 120, 115 F. Thank you for correcting this part of your violation. Observed pH measured using a small sample of rice and tap water. pH was determined to be 4.5. Discussed why this is not correct. The pH of sushi rice must be 4.4 or below. Reviewed correct method for measuring pH - do this 30 minutes after acidifying and before seperating rice into smaller boxes. Provided FSM with examples of sushi rice HACCPs from Sonoma County, City and County of San Fransisco. As discussed during the inspection, maintain sushi pH below 4.4 and promptly obtain distilled water. Continue to instruct staff to use clean utensils. FSM to rewrite HACCP and develop a more user-friendly log. Provide these materials to your Inspector by 4pm on 1/23/2020 to avoid a reinspection.

ROACHY SAYS:

“A food facility may engage in the following activities only pursuant to a written and approved HACCP plan: smoking food as a method of preservation, curing food, using food additives or adding components such as vinegar as a method of food preservation or to render a food so that it is not potentially hazardous, operating a molluscan shelfish life support system display tank, custom processing of animals for personal use as food and not for sale or service in a food facility, using acidification or water activity to prevent the growth of Clostridium botulinum, packaging potentially hazardous food using a reduced oxygen packaging method except as specified in 114419.2(a - c), or preparing food by another method that is determined by the Enforcement Agency to require a HACCP plan. Food facilities with CDPH approved variances must maintain a copy at the food facility at all times. A variance may be suspended or revoked if the food facility is found to be non-complaint with the terms of the variance. (114057, 114057.1, 114417,114117.2, 114417.5, 114417.6, 114417.7, 114419 -114419.3)”

Routine Inspection
06. Hands clean and properly washed; gloves used properly.

Conditions Observed: Observed employee cutting fish failed to remove their gloves when interrupted. Inspector informed employee that gloves must be removed and discarded when a task is interrupted (i.e., before touching other surfaces, foods). Employee removed gloves and washed their hands; COS. Train all staff in proper glove use (wash hands prior to donning gloves, use for one task, and then discard). Observed employee wash hands at corner sink. Observed same employee rinse yams in the same sink. Please clearly identify your dedicated handwashing sink and train employees to wash hands at the handwashing sink.

ROACHY SAYS:

“Food employees shall minimize bare hand and arm contact with nonprepackaged food that is in ready to eat form. Whenever gloves are worn, they shall be changed, replaced, or washed as often as handwashing is required. Single-use gloves shall not be washed. Employees shall wash their hands in the following situations: immediately before engaging in food preparation including working with nonprepackaged food, clean equipment and utensils and unwrapped single-use food containers and utensils; after touching bare human body parts other than clean hands and clean exposed portions of arms; after using the toilet room; after caring for or handling any animal; after coughing, sneezing, using a handkerchief or disposable tissue, using tobacco, eating or drinking; after handling soiled equipment or utensils; during food preparation, as often as necessary to remove soil and contamination and to prevent cross-contamination when changing tasks; when switching from working with raw food and working with ready-to-eat foods; before initially donning gloves for working with food; before dispensing or serving food handling clean tableware and serving utensils in the food service area; after engaging in other activities that contaminate the hands. (113952, 113953.3, 113953.4, 113961, 113968, 113973)”

15. Food contact surfaces: clean and sanitized.

Conditions Observed: No chlorine in the dishwasher today. Reviewed how to trouble-shoot dishwasher. Operator primed the line - measured chlorine to be 50 PPM. COS. Observed pockets of pink slime-like build-up on divider in ice machine. Showed observations to Owner. Remove build-up; clean and sanitize.

ROACHY SAYS:

“Food-contact surfaces and utensils shall be clean to sight and touch. Food-contact surfaces and multiservice utensils shall be effectively washed, rinsed, and sanitized to remove or completely loosen soils by use of manual or mechanical methods. Precleaning may be required. Manual sanitization shall be accomplished during the final rinse by contact with solution containing 100 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. Mechanical sanitization shall be accomplished in the final rinse by achieving a utensil surface temperature of 160F or by contact with solution containing 50 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. After cleaning and sanitizing, equipment and utensils shall be air dried. Mechancial warewash machines must be approved and installed and operated according to manufacturer's specifications. Food contact surfaces, utensils, and equipment shall be cleaned and sanitized at the following times: before each use with different type of raw food of animal origin, when changing from raw food to ready to eat food, between uses with raw produce and potentially hazardous food, before using a thermometer, and any time during the operation when contamination may have occurred. Warewash sinks used to wash wiping cloths, wash produce, or thaw food must be cleaned and sanitized before and after these uses. Equipment, food contact surfaces, and utensils must be cleaned and sanitized throughout the day at least every four hours or as needed to prevent contamination. (114097, 114099.1, 114099.2, 114099.4, 114099.6, 114099.7, 114101, 114105, 114109, 114111, 114113, 114115(a,c), 114117, 114125(b), 114141)”

17. Compliance with shell stock tags, condition, display.

Conditions Observed: Observed shellstock tags lack the dates the shell stock was sold. Label each tag with the dates that shellstock is sold (e.g., an in and out). See CalCode Section 114039.4 (b).

ROACHY SAYS:

“Shellstock shall be obtained in containers that bear legible source identification tags. A food facility shall ensure that shellstock from one tagged or labeled container are not commingled with shellstock from another container with different certification numbers. Shellstock tags shall remain attached to the container that they are received in until the container is empty. The identity of the source of the shellstock sold or served shall be maintained for 90 days from the dates of harvest by using an approved recordkeeping system that keeps the tags or labels in chronological order correlated to the date or dates the shellstock is sold or served. The source of the shellstock on display shall be identified. Shellstock that are portioned or prepackaged shall have a copy of the corresponding shellstock tag. Except in accordance with an approved HACCP plan, molluscan shellfish life-support system display tanks shall not be used to display shellfish that are offered for human consumption. (114039-114039.5)”

19. Compliance with variance, specialized process, reduced O2 packaging, HACCP plan.

Conditions Observed: Vinegar was added to rice prior to rice cooling to 115 F. Measured sushi rice to be 155 F. Follow your HACCP and add vinegar solution when rice has cooled the correct temperature. The HACCP must be followed correctly to ensure rice can be safely held at ambient temperature. Please review your HACCP with all employees who prepare sushi rice. This violation requires a reinspection on/after 1/14/2020.

ROACHY SAYS:

“A food facility may engage in the following activities only pursuant to a written and approved HACCP plan: smoking food as a method of preservation, curing food, using food additives or adding components such as vinegar as a method of food preservation or to render a food so that it is not potentially hazardous, operating a molluscan shelfish life support system display tank, custom processing of animals for personal use as food and not for sale or service in a food facility, using acidification or water activity to prevent the growth of Clostridium botulinum, packaging potentially hazardous food using a reduced oxygen packaging method except as specified in 114419.2(a - c), or preparing food by another method that is determined by the Enforcement Agency to require a HACCP plan. Food facilities with CDPH approved variances must maintain a copy at the food facility at all times. A variance may be suspended or revoked if the food facility is found to be non-complaint with the terms of the variance. (114057, 114057.1, 114417,114117.2, 114417.5, 114417.6, 114417.7, 114419 -114419.3)”

29. Washing fruits and vegetables.

Conditions Observed: Observed employees slicing scallions without washing. Wash whole produce before slicing.

ROACHY SAYS:

“Produce shall be thoroughly washed in potable water to remove soil and other contaminants before being cut, combined with other ingredients, cooked, served, or offered for human consumption. Chemicals used to wash or peel produce shall meet the requirements specifice in 21 CFR 173.315. (113992)”

Routine Inspection
15. Food contact surfaces: clean and sanitized.

Conditions Observed: Observed moderate build-up in corners of white dishes with red, green, gold stripes. Showed observations to FSM, who pulled dishes from service. COS. All utensils shall be clean to the sight and clean to the touch.

ROACHY SAYS:

“Food-contact surfaces and utensils shall be clean to sight and touch. Food-contact surfaces and multiservice utensils shall be effectively washed, rinsed, and sanitized to remove or completely loosen soils by use of manual or mechanical methods. Precleaning may be required. Manual sanitization shall be accomplished during the final rinse by contact with solution containing 100 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. Mechanical sanitization shall be accomplished in the final rinse by achieving a utensil surface temperature of 160F or by contact with solution containing 50 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. After cleaning and sanitizing, equipment and utensils shall be air dried. Mechancial warewash machines must be approved and installed and operated according to manufacturer's specifications. Food contact surfaces, utensils, and equipment shall be cleaned and sanitized at the following times: before each use with different type of raw food of animal origin, when changing from raw food to ready to eat food, between uses with raw produce and potentially hazardous food, before using a thermometer, and any time during the operation when contamination may have occurred. Warewash sinks used to wash wiping cloths, wash produce, or thaw food must be cleaned and sanitized before and after these uses. Equipment, food contact surfaces, and utensils must be cleaned and sanitized throughout the day at least every four hours or as needed to prevent contamination. (114097, 114099.1, 114099.2, 114099.4, 114099.6, 114099.7, 114101, 114105, 114109, 114111, 114113, 114115(a,c), 114117, 114125(b), 114141)”

17. Compliance with shell stock tags, condition, display.

Conditions Observed: Observed loose shellstock tags and tags pinned to the board to be disorganized. Keep stock organized; store in chronological order. See description above.

ROACHY SAYS:

“Shellstock shall be obtained in containers that bear legible source identification tags. A food facility shall ensure that shellstock from one tagged or labeled container are not commingled with shellstock from another container with different certification numbers. Shellstock tags shall remain attached to the container that they are received in until the container is empty. The identity of the source of the shellstock sold or served shall be maintained for 90 days from the dates of harvest by using an approved recordkeeping system that keeps the tags or labels in chronological order correlated to the date or dates the shellstock is sold or served. The source of the shellstock on display shall be identified. Shellstock that are portioned or prepackaged shall have a copy of the corresponding shellstock tag. Except in accordance with an approved HACCP plan, molluscan shellfish life-support system display tanks shall not be used to display shellfish that are offered for human consumption. (114039-114039.5)”

28. Food separated and protected.

Conditions Observed: Observed prep cook rinse scallions in handwashing sink. Do not this - rinse produce in a clean and sanitized food prep sink.

ROACHY SAYS:

“Food shall be protected from contamination during transportation, storage, preparation, holding, and display. Adequate and suitable counter space shall be provided for all food preparation. Food preparation shall be conducted wthin an approved food compartment or fully enclosed food facility. Open-air barbecues shall be separated from public access. (113984(a-f), 113986, 114060, 114067(a,d,e,j), 114069(a, c, d), 114077, 114089.1(c), 114143(c,e))”

34. Non-food-contact surfaces clean.

Conditions Observed: Observed slime-like build-up on holster for soda gun. Remove build-up; clean and sanitize.

ROACHY SAYS:

“Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. (114115(b))”

39. Thermometers provided and accurate.

Conditions Observed: Thermometers in the left deli prep and mounted display case in the sushi station were not operational today. FSM replaced the thermometer in the display case. Provide an operational thermometer for all fridges.

ROACHY SAYS:

“An accurate easily readable metal probe thermometer suitable for measuring temperature of food shall be available to the food handler. Thermometers shall be calibrated in accordance with manufacturer's specifications as necessary to ensure their accuracy. A thermometer +/- 2 degrees F shall be provided for all refrigerators, hot and cold holding units, and high temperature warewashing machines. (114157, 114159)”

Reinspection

ROACHY SAYS:

“Ooo! Welcome to Sanitarytown! Population: Tomo Japanese Restaurant! I see lots of happy hungry mouths in this establishment's near future!!”

Routine Inspection
07. Adequate handwash facilities supplied and accessible.

Conditions Observed: No paper towels at kitchen handwash sinks. Keep handwashing sinks stocked with paper towels and pump soap at all times.

ROACHY SAYS:

“Handwashing facilities shall be provided within or adjacent to toilet rooms, food preparation, and warewashing areas. Handwashing facilities shall be clean, unobstructed, and accessible at all times. Handwashing facilities shall be provided with soap and sanitary single use towels in approved dispensers. Dispensers shall be maintained in good repair. A handwashing facility shall not be used for purposes other than handwashing. (113953, 113953.1, 113953.2, 114067(f))”

15. Food contact surfaces: clean and sanitized.

Conditions Observed: Observed black, mildew-like build-up on plastic divider in ice machine. Remove build-up; wash, rinse, and sanitize impacted surfaces. Clean routinely. Observed food debris and build-up on green trays used to handle fish. Showed observations to FSM, who made a stack to bring to the dishwasher. Observed food debris lip-contact surface on wine glass in the bar. Inspect all glasses for excessive debris. All utensils shall be clean to the sight and clean to the touch. Observed slime-like growth on soda gun holster; observed build-up on soda gun nozzle that is similar in appearance to bacteria on a petri dish. Remove build-up; wash, rinse, and sanitize impacted surfaces. This violation requires a reinspection on/after 3/29/19.

ROACHY SAYS:

“Food-contact surfaces and utensils shall be clean to sight and touch. Food-contact surfaces and multiservice utensils shall be effectively washed, rinsed, and sanitized to remove or completely loosen soils by use of manual or mechanical methods. Precleaning may be required. Manual sanitization shall be accomplished during the final rinse by contact with solution containing 100 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. Mechanical sanitization shall be accomplished in the final rinse by achieving a utensil surface temperature of 160F or by contact with solution containing 50 ppm available chlorine, 200 ppm quaternary ammonium, or another approved sanitizer. After cleaning and sanitizing, equipment and utensils shall be air dried. Mechancial warewash machines must be approved and installed and operated according to manufacturer's specifications. Food contact surfaces, utensils, and equipment shall be cleaned and sanitized at the following times: before each use with different type of raw food of animal origin, when changing from raw food to ready to eat food, between uses with raw produce and potentially hazardous food, before using a thermometer, and any time during the operation when contamination may have occurred. Warewash sinks used to wash wiping cloths, wash produce, or thaw food must be cleaned and sanitized before and after these uses. Equipment, food contact surfaces, and utensils must be cleaned and sanitized throughout the day at least every four hours or as needed to prevent contamination. (114097, 114099.1, 114099.2, 114099.4, 114099.6, 114099.7, 114101, 114105, 114109, 114111, 114113, 114115(a,c), 114117, 114125(b), 114141)”

28. Food separated and protected.

Conditions Observed: Observed chicken thawing in a bus bin with beef. Keep chicken in a separate container. Store foods in order of final cooking temperature.

ROACHY SAYS:

“Food shall be protected from contamination during transportation, storage, preparation, holding, and display. Adequate and suitable counter space shall be provided for all food preparation. Food preparation shall be conducted wthin an approved food compartment or fully enclosed food facility. Open-air barbecues shall be separated from public access. (113984(a-f), 113986, 114060, 114067(a,d,e,j), 114069(a, c, d), 114077, 114089.1(c), 114143(c,e))”

29. Washing fruits and vegetables.

Conditions Observed: Observed employee remove whole scallions from the original packaging and begin slicing without washing produce. Wash all whole produce in a clean and sanitized food prep sink prior to cutting.

ROACHY SAYS:

“Produce shall be thoroughly washed in potable water to remove soil and other contaminants before being cut, combined with other ingredients, cooked, served, or offered for human consumption. Chemicals used to wash or peel produce shall meet the requirements specifice in 21 CFR 173.315. (113992)”

36. Equipment / Utensils approved; installed, clean, good repair, capacity.

Conditions Observed: Observed an excessive volume of standing water in the keg fridge. Remove water; clean and sanitize fridge. Identify and correct source of leak. Observed excessive, sticky build-up on on interior right of deli-prep in the sushi island. Clean.

ROACHY SAYS:

“Utensils and equipment shall be kept fully operative and in good repair. All new and replacement equipment shall be properly installed and be certified or classified for sanitation by an ANSI accredited certification program. Electrical appliances must meet UL standards. Single-use articles shall not allow migration of deleterious substances or impart colors, odors, or tastes to food. Multi-use food contact surfaces must be smooth, free of breaks, chips, and similar imperfections; free of sharp internal angles, corners, and crevices; finished to have smooth welds and joints; be accessible for cleaning and inspection. Unless specified, wood and wood wicker may not be used as a food-contact surface. Unless specified, copper and copper alloys such as brass may not be used in contact with a food that has a pH below six or for a fitting between a backflow preventer and a carbonator. Beverage tubing and cold-plate beverage cooling devices cannot be installed in contact with stored ice intended to be used as food. Equipment that is not movable must be installed to allow for cleaning in place. Cutting or piercing parts of can openers must be readily removable. Facilities that wash, rinse, soak, thaw, or similarly prepare foods shall be provided with a approved food preparation sink. Reservoirs that supply water to produce foggers must be cleaned and maintained. Surfaces such as cutting blocks and boards that are subject to scratching and scoring shall be resurfaced or replaced if they can no longer be effectively cleaned and sanitized. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114153, 114163, 114165, 114167, 114169, 114175, 114177, 114180, 114182)”

37. Equipment, utensils and linens: storage and use.

Conditions Observed: Observed deli prep cutting boards resting on floor. Wash, rinse, and sanitize boards before returning to service. Keep all utensils and food contact surfaces at least 6 inches above the floor.

ROACHY SAYS:

“Clean equipment, utensils, linens, and single-use articles shall be stored at least six inches above the floor in an approved location within the fully enclosed permitted food facility. Clean equipment, utensils, linens, and single-use articles shall not be exposed to splash, dust, vermin, or other forms of contamination. Non-food items shall be stored and displayed separate from food and food-contact surfaces. During pauses in food preparation utensils shall be stored with handles above the top of the food, on a clean sanitized surface, in running water, or in water that is at least 135øF. Single-use articles and multiservice utensils shall be handled, displayed, and dispensed so that contamination of food and lip-contact surfaces is prevented. Extra preset tableware shall be removed when a consumer is seated or cleaned and sanitized before further use. Pressurized cylinders shall be securely fastened to rigid structure. Linens must be free of food residue and soil and be laundered as required. (114074, 114075(a,b,d,e), 114081, 114119, 114121, 114161, 114172, 114178, 114179, 114083, 114185, 114185.2, 114185.3, 114185.4, 114185.5)”

© 2021 Lost Coast Communications Contact: news@lostcoastoutpost.com.